EOL: Tourelle avec positionnement ultrarapide

Tourelle avec positionnement ultrarapide
  • Pans up to 100º per second, 360º continuous rotation
  • Tilts up to 40º per second, -90º to +40º range
  • Wide range of camera-zoom combinations
  • Multi-protocol including Biphase and Bilinx
  • IP 66 rated, tough, attractive casing with up to 20 kg balanced load
  • Aperçu
    Input voltage 24 VAC - 5 A / 230 VAC - 0.5 A
    Input frequency 50 Hz
    Integrated housing Thermostat heater, 20 W
    Camera input 12 VDC - 800 mA
    Lens input +6 to +15 VDC - 200 mA
    Wiper (optional) input 24 VAC – 400 mA
    Tour control Autopan; Preset; Patrol
    Presets 250 selectable (max. 99 via keyboard)
    Preset / area names 20 character string
    Preset accuracy 0.02 º
    Data set-up Flash memory
    Serial RS-232, Sub-D for firmware upgrade
    Protocols Bilinx, Biphase and third party protocols on RS485
    Supported platforms DiBos, Divar, Allegiant
    Max addressable units 255 (dipswitch setting)
    Firmware upgrades RS-232 interface
    Configuration modes Via PC or OSD
    Configuration interface RS-485
    Number of effective pixels Approx. 440,000
    Imager 1/4 in. Exview HAD CCD
    Resolution 540 TVL (NTSC, PAL) typical
    Minimum illumination 1.4 Lux (typical) at F1.6, 50 IRE
    S/N Ratio More than 50 dB
    Electronic shutter 1/1 to 1/10,000 s, 22 steps
    White balance 2000 K to 10,000 K
    Gain Off/Auto (with adjustable limit)
    AE Control Auto, manual, priority mode, bright, EV compensation, backlight compensation
    Focusing system Auto (sensitivity: normal, low), One-Push AF, manual, infinity interval AF, zoom trigger AF
    Video output 1.0 Vp-p, 75 Ohm
    Masking
    Privacy zone On/off (24 positions)
    Max blocks display 8
    Blocks resolution 160 H x 120 V
    Lens
    36 x optical zoom F=3.4 (wide) to 122.4 (tele), F1.6 to F4.5
    Digital zoom 12 x (312 x with optical zoom)
    Angle of view (H) 57.8° (wide) to 1.7° (tele)
    Number of effective pixels Approx. 440,000
    Imager Interline CCD 1/4 –inch format
    Resolution ≥ 460 TVL
    Minimum illumination 1.0 Lux (typical) at F1.6, 50 IRE
    S/N Ratio More than 50 dB
    Electronic shutter 1/1 to 1/10,000 s, 22 steps
    White balance Auto, ATW, indoor, outdoor, One-Push, manual
    Gain Auto/manual (-3 to +28 dB, 2 dB steps)
    AE Control Auto, manual, priority mode, bright, EV compensation, backlight compensation
    Focusing system Auto (sensitivity: normal, low), One-Push AF, manual, infinity interval AF, zoom trigger AF
    Video output CVBS: 1.0 Vpp
    Masking
    Privacy zone On/off (24 positions)
    Max blocks display 8
    Blocks resolution 160 H x 120 V
    Lens
    26 x optical zoom F=3.5 (wide) to 91.0 mm (tele), F1.6 to F3.8
    Digital zoom 12 x (312 x with optical zoom)
    Angle of view (H) 55° (wide) to 2.3° (tele)
    Dimensions (H x W x D) 584 x 258 x 514 mm (23 x 10.2 x 20.2 in)
    Weight Approx. 14  kg (31 lb)
    Mounting Top mount (OTT)
    Color Light grey (RAL 7035)
    Material Die cast and extruded aluminum, ABS
    Rotation
       horizontal 360º continuous
       vertical -90º to +40º
    Speed Manual , Patrol / Autopan
       horizontal (pan) 0.1º to 100º/s , 0.1º - 100º/s
       vertical (tilt) 0.1º to 40º/s , 0.1º – 30º/s
    Static / dynamic torque
       horizontal 20 Nm
       vertical 20 Nm
    Transmission Toothed belt
    Operating temperature -20 ºC to +50 ºC (-4 ºF to +122 ºF)
    Storage temperature -20 ºC to +60 ºC (-4 ºF to +140 ºF)
    Humidity <90% relative humidity (noncondensing)
    Enclosure protection IP 66

    Images

     
  • Certificats (1)
    Titre Type Langue
    Declaration of Conformity PDF
     
  • Documents (4)
     
 

Accessoires

MTC‑WUPH - Montage mural extérieur

pour série UPH

Type commercial n°: MTC-WUPH
Produit n°: F.01U.029.234

 

MTC‑PUPH - Montage sur mât extérieur

Pour installer un appareil UPH en tête de mât

Type commercial n°: MTC-PUPH
Produit n°: F.01U.029.233

 
 

MTC‑CORN‑W Corner Adapter for MTC‑WUPH

Type commercial n°: MTC-CORN-W
Produit n°: F.01U.030.361

 

MTC‑POLE‑W Pole Adapter for MTC-WUPH

Pour installer un appareil UPH sur le mât

Type commercial n°: MTC-POLE-W
Produit n°: F.01U.030.360